The tools you will need

• drill
• clean damp cloth
• screwdriver
• adhesive
• suitable for fixing polyurethane mouldings

Method 1
Fitting ceiling centre over existing light fitting

• ENSURE THE ELECTRICITY IS TURNED OFF AT THE MAINS WHILST PREPARING AND FITTING.
• Drill a hole in the centre of the ceiling centre for the flex to come through and if necessary remove screw-on cover from ceiling rose / light fitting.
• Ensure ceiling surface is clean, firm and even.
• Apply adhesive or similar to rim on reverse of ceiling centre. Position and hold temporarily until it adheres
• Remove surplus adhesive with a clean damp cloth.
• Paint as necessary.

Method 2
Removing ceiling rose before fitting ceiling centre

• ENSURE THE ELECTRICITY IS SWITCHED OFF AT THE MAINS WHILST PREPARING AND FITTING.
• Remove ceiling rose. Drill a hole in the centre of the ceiling centre for the flex to come through.
• Ensure ceiling surface is clean, firm and dry.
• Apply adhesive or similar to rim on reverse of ceiling centre. Position and hold temporarily until it adheres.
• Remove surplus adhesive with a clean damp cloth.
• Refit ceiling rose through the ceiling centre using appropriate screws to ensure secure fixing to the joists.
• Paint as necessary.